Ignition Switch Housing Replacement
(1997-2006)

These instructional pages give you step-by-step instructions for the replacment of the ignition switch housing assembly that holds the actuator, lock cylinder and ignition switch. This cast housing assembly is often broken during a theft of vehicles with this design column. Jeep only sells this as part of a complete steering column (sometimes for as much as $1200). We offer both the parts and instructions. In some cases, this repair can be done without the removal of the steering column. These instructions will show you how to accomplish this

Estimated Time Required: 1- 1.5 hrs.
Tools Needed: Small Flat Screwdriver, Phillips Screwdriver, 20 Torx Driver, 25 Tamperproof Torx Socket, Ratchet, 3" extension, Small Ball Peen Hammer, 1/4" Punch, 10 mm socket, 13mm socket, 6" extension, Pliers,



Our Part # Hsg04 Instructions (including Jeep)
Fits Makes: Jeep (Chrysler-Dodge)
Fits Years: 1997-2006

$18.95