1980-1991 Ford NON-Tilt Column Overhaul Instructions

Ford Trucks

This 14 page set of instructions gives you step-by-step pictorial and written instructions for rebuilding the complete steering column on a 1980-1991 Ford Truck with a NON TILT column. To determine is yours is truly an NON-Tilt, compare the photos below with your steering column. This design was used on a variety trucks but is more rare than the tilt design.

Estimated Time Required: 1.5 - 2.5 hrs.
Tools Needed: Steering Wheel Puller, Phillips Screwdriver, 1/4" & 7/16" Socket with 4" extension & Ratchet (or Screw Gun), Small Probe, 20 Torx Driver, Right Angle Pick, Large Flat Blade Screwdriver, Inside and Outside Snap Ring Pliers, 4" long PVC Pipe 3/4" dia, Small Hammer, Small Punch, 3/16" drill bit, Rivet Gun and Rivet).




Our Part # F80-91CN Instructions
Fits Makes: Ford Lincoln, Mercury
Fits Years: 1980-1991

$24.95